Tin-Free Alpha MS Polymer | Manta MS313

Manta MS313 is a silane-terminated polyether for moisture-curing adhesives and sealants, also used as an additive in coatings. It cures rapidly on exposure to atmospheric moisture to a tough, elastic siloxane-crosslinked network.

Its reactivity allows fast curing without organotin catalysts, which makes MS313 an alternative to conventional polyurethane and silicone systems where tin-free formulations are required. The moderate viscosity gives broad formulation latitude and allows compounding with high filler loadings, and the modulus can be adjusted over a wide range by formulation.

MS313 and Manta MS310A are both high-activity polymers that allow tin-free formulations. MS313 has the higher viscosity of the two, 30,000 – 42,000 mPa·s at 25 °C compared with 8,000 – 12,000 mPa·s at 25 °C, and its data sheet includes a starting formulation for a crystal-clear sealant.

• Industrial adhesives: elastic bonding in structural engineering, automotive assembly and transportation where vibration resistance and durability are required
• Construction sealants: paintable, weather-resistant construction sealants; suitable for low-VOC formulations
• Transparent adhesives: clear, elastic adhesives
• Electrical and electronics: can be evaluated as a potting or encapsulation compound for stress relief of components; insulation properties must be verified in the final formulation
• DIY and assembly: liquid-nail type assembly adhesives with high initial tack and fast strength build-up

50 kg plastic drum with aluminum-foil liner bag;

200 kg drum with aluminum-foil liner bag;

1,000 kg IBC (tote);

Other pack sizes available on request.